Included in this Kit :

• 2 support plate       3/8”
• 2 support plate       1/2”
• 2 support plate       5/8”
• 2 support plate       3/4”
• 2 clamp assembly 7/8”

WARNING: wear protective equipment. Refrigerant and solvent can cause injuries.

Feature :

For most A/C line or tube ends and flushing their A/C system. Tools free

Technical specification :

2set/box GW 520g 162x80x46mm For 1/4”~7/8”SAE pipe

Operation Guide :

1. Selecting the correct support plate to fit the tube or line fitting turn the clamp screw until the cone is seated against the end of tube.
2. While holding the clamp screw by hand, Rotate the force nut 1/4 turn. To provide a leak tight for flushing operation. Without tools

For example :