SOLVENT FLUSH / RINSE / RECYCLE
FOR VEHICLE A/C SYSTEM

Item No: FLUSH MC

Feature :

1. Powerful & economical using shop air 30-160PSI
2. Easy using control knob
3. Function: blower, flush, refine, and recycle dry.
4. Fine ceramics driver using with any approved for R-12&R-134a flush solvent
5. 7 litter level of sight glass
6. 4-wheel easy moving and stop

Technical specification

• H 97(38") x W 45(17.4") x D 42cm(16.2"), Weight 34Kgs(70lbs)
• Solvent content : 7 litters(2Gals)
• Power source : 1/2Hp compressed air (without oil)
• Operation pressure : 30-160PSI
• Flushing rate : 4 litters/min at 40PSI
• Recycle rate : 10 litters/min at 40PSI
• Air filter : 5 micron semi-auto drain
• Replacement filter : HC-6243(3/4"-16N)

Remark

1. Be sure no air pressure in flushing before remove filler cap.
2. It is recommend that the filter be change regularly to prevent contaminated and possibly acidic oil.
3. Max. air pressure 160PSI, regulated at 30-160PSI
4. Using suitable solvent for your repair system.
5. After flush and dry the vacuum is need.